67 Series HPU, Diesel Engine Driven

---

Part Number: b5a368224813

Brand: Tronair

Tronair offers Hydraulic Power Units to meet your specific aircraft requirements. Commercial, regional, and business airlines use Tronair HPUs to reduce aircraft filter changes and increase aircraft component life. This product is the 67 series HPU and is diesel powered.

67 series features

• 0-34 gpm, 250-4000 psi, flow and pressure ratings
• 24 volt, dual battery for cold weather starts
• 70 gallon stainless steel hydraulic reservoir with desiccant breather, drain valve, and air removal system
• Bright LED lighting on engine and hydraulic instrument panels, and unit corner lights for night operation
• Bypass Valve for loading and unloading
• Calibration Port Shut Off Valve
• CE Marked
• Convenient hangers and trays to hold and contain the hydraulic hoses when not in use on the aircraft
• Corrosion resistant galvanised sheet metal and resistant stainless steel hardware
• Cummins, QSB4.5P130, Tier 3, 130 HP, 1800 rpm diesel engine (Jet-A or diesel fuel)
• Dual system with 50' (15 m) pressure and return hoses, pressure and return coupling for both systems
• Easy access, light weight, removable pin hinged panels for full access to all maintenance components
• Engine block and grid heater cold weather system
• Engine System Monitor: Back lit digital display and diagnosis (DDD) with hour meter, and LED indicator lights
• Finish: Durable Powder Coat Tronair Blue
• Hand Pump Gauge
• Hydraulic fluid sample port for contamination testing
• Hydraulic System Meters: Digital (0.1% FS) flow meter, digital (0.25% FS) pressure gauge, digital (0.5% FS) temperature gauge
• Hydraulic system open or closed loop
• Large 35 gallon fuel tank for 12+ hours of use
• Large forced air cooler (20+ HP heat removal) hydraulic heat exchanger, thermostat controlled cooling system
• Powder coated (and Jet-Glo) Skydrol and UV resistant painted steel panels
• Pressure Control Valve
• Pressure Filtration: 2 micron, non-bypass type (beta rating >200 @ 2 micron)
• Pressure Gauge Calibration Port
• Quiet Operation: Less than 85 dbA at three feet noise level
• Reservoir Service/Component Testing: Manual two stage hand pump (high volume / 5000 psi) with 2 micron, non-bypass type (beta rating >200 @ 2 micron) pressure filter
• Return Filtration: 5 micron, bypass type (beta rating > 300 @ 5 micron)
• Ruggedized frame with enclosed fork lift tubes and 10,000 lb tie down rings
• Running gear rated for 8500 lbs. and 10 mph, Four wheel Ackerman steering with leaf spring trailer towing system with two wheel parking brake
• Selector Valve to select between aircraft or HPU reservoir
• The Engine DDD is a multifunction tool, which displays many engine-operating parameters including oil pressure, oil temperature, running hours, RPM, coolant temperature and fuel consumption. For the technician, the DDD can display service reminders for filter replacements, active fault codes and stored service codes for easy engine maintenance and diagnostics
• User friendly engine control panel for easy operation, includes service tool socket

 

67 series Safety Features:

• Hydraulic high and low reservoir shutoff feature with LED warning and indicating lights (panel and stack)
• Hydraulic high temperature shutoff feature (160º F) with LED warning and indicating lights (panel and stack)
• Engine no fuel and low fuel, high temperature, and low oil pressure LED indicating lights (panel and stack)
• Lubricity and fuel/water separator with water-in-fuel (WIF) sensor
• Low coolant shut down system
• Pressure filter clogging indicator LED light with reset button
• Pressure gauge calibration port for (on unit) calibration with safety shut-off valve
• Emergency stop button, system pressure relief valve, maintenance only access panels, return system pressure relief valve, automatic warning and shutdown systems
• Fire extinguisher